Integra cluster into 92-95 civic (wiring)

This is just a wiring guide!!

I did this in the summer of 2004 using a 2001 JDM GSR cluster into a 1994 Civic DX. Everything worked accurately, how you get the cluster in the car is up to you. I had a list of what each wire does but lost it, so if you want to know what each is for i suggest a search on google or honda-tech.

***********READ THIS************
-Some wire colours on your Integra harness may be different, however most should be the same as this guide
-This was put in a DX CIVIC with no ABS, I think the wires labelled “Not Used” are for this. If you don’t have ABS I suggest removing the ABS light on the cluster or it will always be on, and it’s very annoying

The first colour is the main colour of the wire, the second is the stripe colour. IE: A red wire with a white stripe = Red/White

Integra Harness ———— Equivalent Civic
13-pin blue connector
Blue—————————–Blue (Tachometer)
Green/Orange—————-Green/Orange
Yellow/Red——————–Yellow/Red
White/Blue——————–White/Blue
Yellow/Green—————–Yellow/Green
Black—————————Black
Yellow/Blue——————-Yellow

16-pin connector
Yellow/White—————–Yellow/White
Teal/Red———————-Not Used* (ABS?)
Blue/Yellow——————-Not Used*(ABS?)
Blue/White——————-Yellow/Blue
Green————————-Green
Red/Blue———————Blue/White
Black—————————Red
Red/Black———————Red/Black
Black/Yellow——————Black/Yellow
Green/Blue——————-Green/Blue
Green/Yellow—————-Green/Yellow
Red/Green——————-Red/Green
Green/Red——————-Green/Red

SRS Connector: The stock one just doesn’t plug in and work. What I did was cut the stock harness and wire the Integra one to the equivalent wires. The colours match up. The integra harness has 3 wires while the civic has 2 so you only have to match the 2 wires up and tape the 3rd off

Result:

Both comments and pings are currently closed.

Comments are closed.