JDM Side Amber Install

Heres a DIY on jdm side amber install, this will take approx 15 minutes as long as you dont drop the screw into your engine bay area during installation. You may want to silicone or seal the lights before installaton as they sometimes leak and create condensation in the lights. These sides can be picked up for around $40 and no other materials are required.

Before Shot of stock sides
e9fa45fdc2274fc2d98208c7e411c718  JDM Side Amber Install




Remember that if you do not slide into place these two sides the jdm sides will not line up nicely on the top or sides. You will need to line these sides up and 2 pins on the opposite side of the amber



Both comments and pings are currently closed.

Comments are closed.