b4 i start, this is only a guideline, and i’m not resposible for anything goin worng wit your car, use at you own discretion there has been discussion and descriptions, but no pictures, so i decided to cleen out the durty ass engine bay and take sum pictures here we go this is realy the [...]
Garage Oil change w/ PCV valve replacement (D16Y7)
1. place the wheel stoppers at the back tires then Jack the car to your desired height and place the jack stands
2. locate the drain plug. (its in the driver side area , just about the same distance with the wheels
Retro-Fit in 01-03 civic
First bake the set of lights in the oven,
I left mine in for 5 minz at 250 preheated.
Pry open the lights carefully and use a razor blade if nessesary to cut the glue.
Blacked out my front grille – 04 Si Sedan
I never liked the plain solid silver look, mostly because it looks JUST LIKE every other freakin’ silver DX/LX/’Special Edition’ Civic on the road, so I decided to give my Si a little custom appearance.
SIR rim refinishing
- dishwashing soap
- paint brush
- paint scraper
- LePage Poly Super Strippa
- wet/dry sand paper (I used 320, 400, 800, 2000)
- Microfibre towels
- Mother’s aluminum polish
for those of you that have an irradic idle and are annoyed with it heres how you clean and fix the problem. IACV = Idle Air Control Valve step one: locate your IACV it looks like this and on D series engines its mounted on the rear of the intake manifold near the throttle body, [...]
These greasable polyurethane sway bar bushings are top notch. I have the front and rear Progress Group anti-roll bars on my car. The front is 27mm in diameter and the rear is 22mm in diameter. I chose the sway bar bushing based on the information on this webpage: Sway Bar Bushings I bought the 9.5158G [...]