Honda Fit DIY

I really wanted more light since I drove a lot when it was dark out. The fog lights give you a wider view up close. The install was very straightforward and the most time consuming part was getting around under the dash to plug in the harnesses and finding the harnesses to plug into. It took me about 2 hours from beginning to end.

The fog lights came with instructions from Honda and also the template that I used to cut out the holes for the fog lights. You do need a drill, two drill bits (3mm and 5.5mm), a hack saw, ratchet wrench (8mm and 10mm), and some other tools. Follow the Honda instruction manual for the install. It will show you everything you need to know. The pictures I have posted just gives you a better visual of how things will look.

Here’s a link to the installation instructions from http://www.handa-accessories.com/ website.
http://www.handa-accessories.com/fit/fog.pdf

Outline of the cutout and drilled a few starter holes.

How it looks like after you have made the cutout for the fog light to fit.

The work area.

Installation of the fog lights and running of the wiring harness.

Before

and after

smeister13