S2000 Seats in DC2 Install

I got a set of S2000 Seats for cheap ($150 + my NRG Seats), the guy i got it from ran with just 3 of 4 bolts, I decided to fab the 4th bracket to be extra safe.

Side Note: I know people have been wondering how low they sit, I’m 5′8″ and i feel very comfortable (pedal and shifter reach wise) and can see over the dash just fine when the steering wheel is at it’s lowest setting. However I do NOT recommend S2000 seats if your shorter than 5′7″, the dash and steering wheel would get in the way of your line of sight (this doesn’t mean you can’t drive with it, i just don’t recommend it.

STEP 1
The front two brackets should bolt right up.

[sorry no pix, but it's pretty self explanatory]

STEP 2
Drill/Grind the rear inner bracket hole in order to lengthen it for the bolt to fit.

01ee53e8aad4cdd31eb05d4b33bf527e  S2000 Seats in DC2 Install

STEP 3
Get a piece ( you only need a foot, but I could only find in 4′ sections) of 1/8″ thick 1-1/4″ wide metal.

Cut two 5″ sections, and bend (using vise and a BFH, big f*cking hammer) until it conforms with the mounting point in your integra.

d0357e635f2e20a3610ed75d440e22dc  S2000 Seats in DC2 Install

STEP 4
Use a Cut-Off wheel to cut through factory welds (red) and a grinder to remove top of rivet (blue) then use a center-point and hammer to push out the rest of the rivit.

ad18149f4c568ccbee14609380c82a56  S2000 Seats in DC2 Install

5c53cf5598ef9386ffb55f04d2b21a41  S2000 Seats in DC2 Install

This is what it should look like once the bracket it off, you might need to use a pry bar

3745e22fb6742b756db00c59ce16ebe1  S2000 Seats in DC2 Install

STEP 5
Place seat in car (and bolt 3 of 4 bolts) and slide new bracket in place, mark with 2 lines using a sharpie.

5cbf055e7ce010b4295340bf9a88696d  S2000 Seats in DC2 Install

STEP 6
Remove seat, align bracket

1dc4814d604b9350bc772dbea1c34bea  S2000 Seats in DC2 Install

STEP 7
and Weld (green)

aad1090ab30529bc1d414a87b6f2e4af  S2000 Seats in DC2 Install

a2e3aec74b034b2f4c8172528775df8c  S2000 Seats in DC2 Install

51d9878a97e95266fba1890755c20087  S2000 Seats in DC2 Install

STEP 8
Grind down weld

This:
01e9abe3f45c04fe01e07bb2f6e493fd  S2000 Seats in DC2 Install
To This:

81bb891390269610085a3adef7e06717  S2000 Seats in DC2 Install

STEP 9 (optional for extra safety, factory rivet replacement)
Drill 2 holes (green) then weld in holes

8581b654e14e92657b3dd69b5447f679  S2000 Seats in DC2 Install

STEP 10
Grind down

64c8bd1ad5a1b2622ec10a5e8518cbcb  S2000 Seats in DC2 Install

STEP 11
Hit with paint

fdb9995e22c533488c33c0624a5d668c  S2000 Seats in DC2 Install

STEP 12
Finished Bracket

358766cf9edf37ef912da17b13876eaf  S2000 Seats in DC2 Install

STEP 14
Install

cad1833d751270587d9d391e02f73c6b  S2000 Seats in DC2 Install

STEP 14
Enjoy

9566252115cb5c4a19bcd77bd79af3ce  S2000 Seats in DC2 Install

e284d13d07474dbd09de280f34a4e0a4  S2000 Seats in DC2 Install

S2000 Seats in DC2 Install
Both comments and pings are currently closed.

Comments are closed.