Acura RSX

I hope this helps.

Breakdown of the color coding:
85——-WHITE
86——-BLACK
87——-YELLOW
87A—–RED
30——-BLUE

Ignore the ignition part there, you are actually wiring it to the accessories.

And if for any reason that’s not clear, here’s the diagram:

Now to set it up in the car.

UNPLUG THE CAR BATTERY

Follow Krisen Type-S’ write up to run the wires for the mirrors to this part of the car.

The 3 relays can be mounted here:

Now you run that 12V wire to a 12 V source. Those of you that have the S2000 Start Button can simply tap into the the relay for the S2000, number 30 on the relay. (Which is why I indicated in the photo above that the relay is there)

The trigger wire (the 3 black ones in the photos), is met to go to the POSITIVE wire for the Cigarette Ligther. (In one of the photos I wrote ignition, so just ignore that)

The switch can be installed at a place of your choice and just tap into the Cigarette Ligther wire.

The yellow wire, which is composed of 5 wires, is the ground. Ground it here, it’s easier this way:

Now plug in the battery, put the key in the ignition and it should do this

http://www.youtube.com/watch?v=IZBivKtxaDg

http://www.youtube.com/watch?v=7KUdv-712F8

Here’s the new video with the switch:
http://www.youtube.com/watch?v=zSLXJkTeEhI

Here’s the switch: (Below the OEM coin holder)