fixing broken angel eyes this in on an ef

tools u wil need are

1 flathead screwdriver
1 star screwdriver
1paint removal heat gun
4 new led’s
1socket set

1st off remove the headlights from the car

fb2a421a2950c282b5ad5c02b418b9db  fixing broken angel eyes this in on an ef

then i removed all the brackets atatched 2 the rear headlight all the bulbs and wires
7e242567037fb7c29c9b11a046bdaff2  fixing broken angel eyes this in on an ef

then go get the heat gun

aa6a7327ef5b661348a2cb194d5bfa00  fixing broken angel eyes this in on an ef

and prasead 2 warm up all the glue along the whole seem between the 2 parts of the light the black and the clear

c7347bb246c2afb720794c1731913056  fixing broken angel eyes this in on an ef

but dont do it 2 mutch in 1 spot or the heat cun wil melt the plastik

It may be an idea u use some gloves 4 this part i dident and i could hardly hold the headlight after heating it up

(or u could put it in the oven) i dident have that option here

once the glue is hot u can slowly pry the seem apart but it must be hot orit wont move

dont put 2 mutch preasure on the scrwerdiver if its 2 hard 2 open u need more heat

as u get 1 part open go along with the screwdriver opening the edges more whilst useing the heat gun 2 aid in the seperation

if the glue cools it wil become hard again

once u seperate the 2

afee36fabd6920ad06ae58ec91fca841  fixing broken angel eyes this in on an ef

then remove the ring from the molded plastik and the 2 leds should easily come out

they are often cheeply made u can see the bad tapeing job that was done back in indaneezia or werever this crap was made

i got my led’s from futurshop they were expensive but eh they were 25$ for 4 of them

39ca0f5e9c1703a482300e612ff4cafc  fixing broken angel eyes this in on an ef

they come in many different colours most angel eyes come with white bulbs but they kinda look blueish whilst driveing

install the new led’s u just purchased

7295b10e3a7becb5cf47f3a48eeea7c7  fixing broken angel eyes this in on an ef

57e41db04ccb5bbb834d27886307ba81  fixing broken angel eyes this in on an ef

befor u put the headlight all back together u should test the led’s 2 make sure u dident buy a dud

a7fc282cf00749c05a1c8236297c33c0  fixing broken angel eyes this in on an ef

7dfd14eaefdb6de647c7f942c216169c  fixing broken angel eyes this in on an ef

then its a simple case of putting it all back together

some people use silicone wen puting it back together 2 prevent leaks and the lamp fogging up i dident do this i just heated up the glue again and then stuck the front lenz back on

i find the led’s burn out prety fast depending on use and if u use silecone its a ***** 2 get apart again later

so im just going 2 run a small beed of silicone around the edge once its all cooled down just so its easy 2 remove later

and finaly test and install back in the car

d92eee369b7a68b55138d034c1a84e05  fixing broken angel eyes this in on an ef

o yea if u are doing ihis on an ef ahhaha good ****ing luck geting the headlights out that screw underneath is a ****ing hore 2 get out

I’ve had my angeleyes for almost as long as i’ve had my car…..3 years now just about… and they havn’t burned out since…. but i find that i don’t use them all the time… i have my halos hooked up to a switch in my car…. i tend to have them off but when i feel like showing off alittle i turn them on… plus its good to turn them off when you see cops up ahead… cause i mean those kinda flashy things just attracts them like moths to a flame… but since they aren’t always on at night and i have the option i think that is one of the reasons why its lasted me so long…

heres a pic of the switch… i made it myself… i tried to make it look stock as if it came like that in the car…. also heres a pic of the angeleyes… mmmm sexy… lol

509ca8a9281ec360735cced22e692b1b  fixing broken angel eyes this in on an ef

Both comments and pings are currently closed.

Comments are closed.